To Install:

INI file is set correctly if you unzipped this into C:\MarineReportDatabasev5
and installed MArineRecorder into C:\MarineRecorder5\

If you have differnet paths - please edit.

Open the ReportDatabasev5.INI file and check the paths are correct on your system for:

	SNAPSHOTDATA.Mdb=C:\MarineRecorder5\SnapshotDatav50.mdb

and

	AccessMDB=C:\MarineRecorder5\SnapshotDatav50.mdb

Both should point to the snapshot file you want to use (v5)

If using GIS - path below needs to point to where MarineReportDatabase is installed

[Setup]
MRWizard.ini=C:\MarineReportDatabasev5